Swans M50W
The Swans M50W from Hivi is a 2.1 music system suitable for PC, PS3, CD, iPod, XBOX360, DVD as well as hi-fi music listening systems and gaming systems. It aims to produce high-quality audio for the desktop.
Featuring a powerful bass, enjoy warm and clear sounding highs and mids with two stunning wood satellite speakers, together with piano lacquer roofs and floors alongside dashing walnut veneer sides. This is joined by a powerful 6.5″ subwoofer which enables playback all the way down to 38Hz. A 20mm hard dome tweeter alongside a 3″ mid-bass driver works in response to frequencies from 120Hz to 20 kHz.
With a convenient turntable volume and power control dial, you can control your audio wherever you go. Swiftly turn your music on and off by tapping the control or spin it to get the desired volume. The indicator light will become red when the music is muted and turn blue when the music is played back on.
Equipped with an overpowering subwoofer, finished with walnut and black piano lacquer for a refined classier look, with a wider frequency range, the Swan M50W Multimedia Speaker System gives you excellent sound that fits right on your desk.
| General Data | |
| Amplifier Type | Class AB |
| System Series | HiVi 2.1 music multimedia speaker series |
| Powered Satellites | |
| System Type | 2-way 2nd order vented satellite speaker system |
| Acoustic System | |
| Driver Configuration | Woofer: 3" mid-bass driver; Tweeter: 20mm dome tweeter |
| Frequency Range | 110Hz - 20kHz |
| Harmonic Distortion | 210Hz - 20kHz ≤ 1%(2.83V/1m) |
| Sensitivity | 81dBÂ (2.83V/1m) |
| Nominal Impedance | 8Ω |
| Power Handling | 1 - 15W |
| Other Parameters | |
| Dimensions (L x W x H) | 5.5" x 5.5" x 7.1" |
| Net Weight (each) | 1.58 Kg |
| Finish | Walnut / Black piano lacquer |
| Amplifier System | |
| Rated Power | 2 x 18W RMS |
| Frequency Range | 120Hz - 20kHz |
| Signal to Noise | >85dB (unweighted) |
| Harmonic Distortion | THD<1%(8Ω, 1KHz ) |
| Input Sensitivity | 458mV |
| Input Impedance | 47kΩ |
| Isolation | >52dB（L, R） |
| Powered Subwoofer | |
| System Type | Active vented box sub system |
| Acoustic System | |
| System Type | One-way active vented box sub system |
| Driver Configuration | 6.5" |
| Frequency Range | 38Hz - 300Hz |
| Harmonic Distortion | 60Hz-300Hz ≤1% (2.83V/1m) |
| Sensitivity | 80dB (2.83V/1m) |
| Nominal Impedance | 8Ω |
| Power Range | 10 - 120W |
| Other Parameters | |
| Finish | Walnut / Black piano lacquer |
| Dimensions (L x W x H) | 12.9" x 11.2" x 9.9" |
| Weight | 10 Kg |
| Amplifier System | Â |
| Rated Power | 78W |
| Frequency Range | 38Hz - 120Hz |
| Signal to Noise | >83dB (unweighted) |
| Harmonic Distortion | THD<1% (8Ω, 100Hz ) |
| Input Sensitivity | 185mV(100Hz) |
| Input Impedance | 47KΩ |
Â
HiVi incorporates excellent 3" mid-range driver ensuring to get amazing vocal performance.
Â
HiVi incorporates Aluminium Hard-Dome Tweeter in Swans M50W's satellites to provide crystal clear high frequencies.
Â
HiVi's 6.5" long-throw woofer/driver ensures to deliver the tight, punchy bass without over-powering the mid-range.
Â
Power AMP circuit board used inside the M50W's.
Â
Swans M50W uses 3 circuit boards which separates the pre-divider, the post-stage driver and power supply. All 3 circuit boards are used in high grade glass fiber to ensure maximal electrical performance.
Â
Swans M50W uses a high end power source, which guarantees continued adequate supply of electricity. In order to provide a pure and constant voltage, an excellent power supply system is specially designed for the maximum performance.Â
Â
This is a close-up of the Swans M50W front-end circuit. It consists of the left and right channels output, an input for 3.5mm stereo input, and dual RCA outputs for the left and right channel speakers.
Â
Eye-candy M50W's aluminium desktop volume control, Speakers can be turned ON and OFF with a single tap on the top of the controller. Illuminated red when the speaker is OFF and blue when the speaker is ON.